124 CHAPTER 5: CONFIGURING WIRED PORTS
page. In addition, several MAC Addresses can be defined for a single
port. To open the Figure 58:
1 Click Wired Ports > Address Tables > Static Addresses > Setup. The
Static Addresses Setup Page opens:
Figure 58 Static Addresses Setup Page
The Static Addresses Setup Page contains the following fields:
■ Interface — Displays specific port or LAG to which the static MAC
address is applied.
■ MAC address — Displays the MAC addresses listed in the current
static addresses list.
■ VLAN ID — Displays the VLAN ID attached to the MAC Address, and
a VLAN called a Routed Interface. Routed Interfaces are the
internally-used VLANs assigned to an port or trunk on which an IP
address is configured.
■ VLAN Name — Displays the User-defined VLAN name.
■ Status — Displays the MAC address status. Possible values are:
To Next Page
Loading...
