200 CHAPTER 9: CONFIGURING IP INFORMATION
Defining Static
Addresses
The Static Addresses Setup Page contains a list of static MAC addresses.
Static Address can be added and removed from the Static Address Table
page. In addition, several MAC Addresses can be defined for a single
port.
1 Click Wired Ports>Address Tables > Static Addresses. The Static
Addresses Setup Page opens:
Figure 103 Static Addresses Setup Page
The Static Addresses Setup Page contains the following fields:
■ Interface — The specific port or LAG to which the static MAC address
is applied.
■ MAC address — The MAC addresses listed in the current static
addresses list.
■ VLAN ID — The VLAN ID attached to the MAC Address, and a VLAN
called a Routed Interface.Routed Interfaces are the internally-used
VLANs assigned to an port or trunk on which an IP address is
configured.
■ VLAN Name — User-defined VLAN name.
■ Status — MAC address status. Possible values are:
■ Permanent — The MAC address is permanent.
■ Delete on Reset — The MAC address is deleted when the device is
reset.
To Next Page
Loading...
