3Com 3CRUS2475 - Viewing WLAN Profiles

Viewing WLAN Profiles 179
■ 802.11a — Indicates that the radio attached to the BSS in
802.11a.
■ Data Rate - Indicates the rate at which data is transferred. . The data
rage can help ensure the link quality between the client device and the
access point. The default wireless data rates are 1, 2, 5.5, and
11Mbps. The possible field values are:
■ Mandatory – Indicates the device must transmit or communicate
at this data rate.
■ Optional – Indicates the device can communicate at this date rate,
but does not transmit at the selected data rate.
■ Not Allowed – Indicates the device cannot transmit or
communicate at this data rate.
Viewing WLAN
Profiles
The Profiles Summary Page allows network managers to define profiles
and rules for accessing the device.
Just one profile can be defined per ESS
and contains configurations of security type, MAC address filtering, load