84 CHAPTER 3: MANAGING DEVICE SECURITY
Defining IP-based
ACLs
To configure IP-based Class Maps:
1 Click Policy > ACL > IP Based ACL > ACL Setup. The IP-based ACL Setup
Page opens:
Figure 45 IP-based ACL Setup Page
The IP-based ACL Setup Page contains the following fields:
■ ACL Name — Contains a list of the IP-based ACLs.
■ Enable New Rule Priority — Enables the new rule priority.
■ New Rule Priority — Defines the ACL priority. ACLs are checked on
the first fit basis. The ACL priority defines the ACL order in the ACL
list.
■ Protocol — Creates an ACE based on a specific protocol.
■ Select from List — Selects a protocol from a list on which ACE can
be based. Some of the possible field values are:
■ Any — Matches the protocol to any protocol.
■ IDRP— Matches the packet to the Inter-Domain Routing Protocol
(IDRP).
■ RSVP — Matches the packet to the ReSerVation Protocol (RSVP).
To Next Page
Loading...
