3Com 3CRUS2475 - Defining QoS General Mode

Defining QoS General Mode 247
Defining QoS
General Mode
This section contains information for configuring QoS general mode, and
includes the following topics:
■ Defining CoS Services
■ Defining Queues
■ Defining Bandwidth Settings
■ DSCP to Queue
Defining CoS
Services
To view CoS Settings:
1 Click Policy > QoS General > CoS > Summary. The CoS Summary Page
opens:
Figure 127 CoS Summary Page
The CoS Summary Page contains the following fields:
■ QoS Mode — Determines the QoS mode on the interface. The
possible values are:
■ Disable — Disables QoS on the interface.
■ Basic — Enables Basic mode on the device.
■ Advanced — Enables the Advanced QoS mode on the device.