3Com 3CRUS2475 - DSCP to Queue

254 CHAPTER 12: CONFIGURING QUALITY OF SERVICE
DSCP to Queue The DSCP Queue contains fields for mapping DSCP settings to traffic
queues. For example, a packet with a DSCP tag value of 3 can be
assigned to queue 2.
To view the DSCP Queue:
1 Click Policy > QoS General > DSCP to Queue > Summary. The DSCP
to Queue Summary Page opens:
Figure 132 DSCP to Queue Summary Page
The DSCP to Queue Summary Page contains the following fields:
■ DSCP — Displays the incoming packet’s DSCP value.
■ Queue — Specifies the traffic forwarding queue to which the DSCP
priority is mapped. Eight traffic priority queues are supported.