Configuring ARP 193
Configuring ARP The Address Resolution Protocol (ARP) converts IP addresses into physical
addresses, and maps the IP address to a MAC address. ARP allows a host
to communicate with other hosts only when the IP address of its
neighbors is known. To view ARP Settings:
1 Click Administration > IP Addressing > ARP Settings > Summary.
The ARP Settings Summary Page opens:
Figure 99 ARP Settings Summary Page
The ARP Settings Summary Page contains the following fields:
■ Interface — Displays the interface type for which ARP parameters are
displayed. The possible field value is:
■ VLAN — Indicates the VLAN for which ARP parameters are
defined.
■ IP Address — Indicates the station IP address, which is associated
with the MAC Address.
■ MAC Address — Displays the station MAC address, which is
associated in the ARP table with the IP address.
■ Status — Displays the ARP table entry type. Possible field values are:
■ Dynamic — Indicates the ARP entry is learned dynamically.
To Next Page
Loading...
