3Com 3CRUS2475 - Defining Router Groups

Defining Router Groups 215
Defining Router
Groups
The Multicast Router Group Summary Page allows net work managers to
define Multicast groups.
To view Multicast Router Groups:
1 Click Policy > Multicast > Router Group. The Multicast Router Group
Summary Page opens:
Figure 112 Multicast Router Group Summary Page
The Multicast Router Group Summary Page contains the following
information:
■ VLAN ID — Identifies a VLAN and contains information about the
Multicast group address.
■ Ports/LAG — Displays status table according to Port/LAG.
■ Interface — Displays the port number.
■ Interface Status— Indicates the port status. The possible field values
are:
■ Static — Attaches the port to the Multicast group as static
member.
■ Forbidden — Indicates the port is not included in the Multicast
group, even if IGMP snooping designated the port to join a
Multicast group.