Configuring EAP Statistics 71
■ Broadcast Mode — Specifies the Broadcast mode currently enabled
on the device. The possible field values are:
■ Unknown Unicast, Multicast & Broadcast — Counts Unicast,
Multicast, and Broadcast traffic.
■ Multicast & Broadcast — Counts Broadcast and Multicast traffic
together.
■ Broadcast Only — Counts only Broadcast traffic.
■ Broadcast Rate Threshold — Indicates the maximum rate (kilobits
per second) at which unknown packets are forwarded. The range is
3,500-1,000,000. The default value is 3,500.
2 Modify the fields.
3 Click . Storm control is enabled on the device.
Configuring EAP
Statistics
The EAP Statistics Summary Page contains information about EAP packets
received on a specific port.
To view EAP Statistics:
1 Click Policy > Security > EAP Statistics. The EAP Statistics Summary
Page opens:
Figure 39 EAP Statistics Summary Page
The EAP Statistics Summary Page contains the following fields:
To Next Page
Loading...
