72 CHAPTER 3: MANAGING DEVICE SECURITY
■ Port — Displays the port number for which advanced port-based
authentication is enabled.
■ Refresh Rate — Defines the amount of time that passes before the
statistics are refreshed. The possible field values are:
■ 15 Sec—Indicates that the statistics are refreshed every 15
seconds.
■ 30 Sec—Indicates that the statistics are refreshed every 30
seconds.
■ 60 Sec—Indicates that the statistics are refreshed every 60
seconds.
■ No Refresh—Indicates that the statistics are not refreshed.
■ Frames Receive — Indicates the number of valid EAPOL frames
received on the port.
■ Frames Transmit — Indicates the number of EAPOL frames
transmitted via the port.
■ Start Frames Receive — Indicates the number of EAPOL Start frames
received on the port.
■ Log off Frames Receive — Indicates the number of EAPOL Logoff
frames that have been received on the port.
■ Respond ID Frames Receive — Indicates the number of EAP Resp/Id
frames that have been received on the port.
■ Respond Frames Receive — Indicates the number of valid EAP
Response frames received on the port.
■ Request ID Frames Transmit — Indicates the number of EAP Req/Id
frames transmitted via the port.
■ Request Frames Transmit — Indicates the number of EAP Request
frames transmitted via the port.
■ Invalid Frames Receive — Indicates the number of unrecognized
EAPOL frames that have been received by on this port.
■ Length Error Frames Receive — Indicates the number of EAPOL
frames with an invalid Packet Body Length received on this port.
■ Last Frame Version — Indicates the protocol version number
attached to the most recently received EAPOL frame.
■ Last Frame Source — Indicates the source MAC address attached to
the most recently received EAPOL frame.
To Next Page
Loading...
