3Com 3CRUS2475 - Activating Image Files

Activating Image Files 269
Activating Image
Files
The Active Image Page allows network managers to select and reset the
Image files.
To upload System Files:
1 Click Administration > Backup & Restore > Active Image. The Active
Image Page opens:
Figure 140 Active Image Page
The Active Image Page contains the following fields:
■ Active Image — The Image file which is currently active on the unit.
■ After Reset — The Image file which is active on the unit after the
device is reset. The possible field values are:
■ Image 1 — Activates Image file 1 after the device is reset.
■ Image 2 — Activates Image file 2 after the device is reset.