Defining IP-based ACLs 87
Defining IP-based
ACLs
To configure IP-based Rules:
1 Click Policy > ACL > IP Based ACL > Rule Setup. The IP-based ACL Rule
Setup Page opens:
Figure 46 IP-based ACL Rule Setup Page
The IP-based ACL Rule Setup Page contains the following fields:
■ ACL Name — Contains a list of the IP-based ACLs.
■ New Rule Priority — Defines the ACL priority. ACLs are checked on
the first fit basis. The ACL priority defines the ACL order in the ACL
list.
■ Protocol — Enables creating an ACL based on a specific protocol.
■ Select from List — Selects a protocol from a list on which ACE can
be based.Some of the possible field values are:
■ Protocol ID — Adds user-defined protocols by which packets are
matched to the ACE. Each protocol has a specific protocol number
which is unique. The possible field range is 0-255.
■ Source Port — Enables creating an ACL based on a specific protocol.
■ Any — Enables creating an ACL based on any protocol.
To Next Page
Loading...
