294 CHAPTER 15: VIEWING STATISTICS
Defining RMON
Alarm Setups
To configure RMON Alarms:
1 Click Wired Ports > Stats > RMON Alarms > Alarms Setup. The
RMON Alarms Alarm Setup Page opens:
Figure 153 RMON Alarms Alarm Setup Page
The RMON Alarms Alarm Setup Page contains the following fields:
■ Alarm Entry — Indicates a specific alarm.
■ Interface — Displays interface for which RMON statistics are
displayed. The possible field values are:
■ Port — Displays the RMON statistics for the selected port.
■ LAG — Displays the RMON statistics for the selected LAG.
■ Counter Name — Displays the selected MIB variable.
■ Counter Value — Displays the selected MIB variable value.
■ Sample Type — Defines the sampling method for the selected
variable and comparing the value against the thresholds. The possible
field values are:
To Next Page
Loading...
