3Com 3CRUS2475 - Enabling IGMP Snooping

Enabling IGMP Snooping 207
Enabling IGMP
Snooping
The IGMP Snooping Setup Page allows network manages to define IGMP
Snooping parameters:
To enable IGMP Snooping:
1 Click Policy > Multicast > IGMP Snooping > Setup. The IGMP
Snooping Setup Page opens:
Figure 106 IGMP Snooping Setup Page
The IGMP Snooping Setup Page contains the following fields:
■ IGMP Snooping Status — Indicates if IGMP Snooping is enabled on
the device. IGMP Snooping can be enabled only if Bridge Multicast
Filtering is enabled. The possible field values are:
■ Enable — Indicates that IGMP Snooping is enabled on the device.
■ Disable — Indicates that IGMP Snooping is disabled on the device.
■ VLAN ID — Specifies the VLAN ID.
■ IGMP Snooping Status — Indicates if IGMP snooping is enabled on
the VLAN. The possible field values are:
■ Enable — Enables IGMP Snooping on the VLAN.
■ Disable — Disables IGMP Snooping on the VLAN.