62 CHAPTER 3: MANAGING DEVICE SECURITY
■ Traps — Indicates if traps are enabled for multiple Hosts. The possible
field values are:
■ Checked — Indicates that traps are enabled for multiple hosts.
■ Unchecked — Indicates that traps are disabled for Multiple hosts.
■ Trap Frequency — Defines the time period by which traps are sent to
the host. The Trap Frequency field can be defined only if multiple hosts
are disabled. The field range is 1-1,000,000. The default is 10
seconds.
■ Status — Indicates the host status. If there is an asterisk (*), the port
is either not linked or is down.
The possible field values are:
■ Number of Violations — Indicates the number of packets that arrived
on the interface in single-host mode, from a host whose MAC address
is not the supplicant MAC address.
Modifying Multiple
Hosts
The Multiple Host Modify Page allows network managers to configure
advanced port-based authentication settings for specific ports and
VLANs.
To Next Page
Loading...
