246 CHAPTER 12: CONFIGURING QUALITY OF SERVICE
To rewrite DSCP values:
1 Click Policy > QoS Basic Mode > DSCP Rewrite > Setup. The DSCP
Rewrite Setup Page opens:
Figure 126 DSCP Rewrite Setup Page
The DSCP Rewrite Setup Page contains the following fields:
■ DSCP In — Displays the incoming packet’s DSCP value.
■ DSCP Out — Displays the outgoing packet’s DSCP value.
2 Select an DSCP Out value for each DSCP In entry.
3 Click . The DSCP values are updated on the device.
To Next Page
Loading...
