Configuring Link Aggregation 135
can only be configured when auto negotiation is disabled. The
possible field values are:
■ 10M — Indicates the LAG is currently operating at 10 Mbps.
■ 100M — Indicates the LAG is currently operating at 100 Mbps.
■ 1000M — Indicates the LAG is currently operating at 1000 Mbps.
■ Current Speed — Displays the current LAG speed.
■ Admin Flow Control — Displays the flow control status on the LAG.
Operates when the LAG is in full duplex mode.
■ Current Flow Control — Displays the current flow control status on
the LAG.
2 Define the fields.
3 Click . Link Aggregation is configured, and the application is
updated.
To Next Page
Loading...
