150 CHAPTER 7: CONFIGURING VLANS
■ Frame Type — Specifies the packet type accepted on the port. The
possible field values are:
■ Admit Tag Only — Only tagged packets are accepted on the port.
■ Admit All — Both tagged and untagged packets are accepted on
the port.
■ Ingress Filtering— Indicates whether ingress filtering is enabled on
the port. The possible field values are:
■ Enable — Enables ingress filtering on the device. Ingress filtering
discards packets that are defined to VLANs of which the specific
port is not a member.
■ Disable — Disables ingress filtering on the device.
2 Define the fields.
3 Click . The VLAN interface settings are defined, and the device is
updated.
To Next Page
Loading...
