152 CHAPTER 7: CONFIGURING VLANS
■ Ports — Displays the GVRP port configuration.
■ LAGs — Displays the GVRP LAGs configuration.
■ GVRP State — Indicates if GVRP is enabled on the selected interface.
The possible field values are:
■ Enable — Enables GVRP on the interface.
■ Disable — Disables GVRP on the interface. This is the default value.
■ Dynamic VLAN Creation — Indicates if Dynamic VLAN creation is
enabled on the interface. The possible field values are:
■ Enabled — Enables Dynamic VLAN creation on the interface.
■ Disabled — Disables Dynamic VLAN creation on the interface.
■ GVRP Registration — Indicates if VLAN registration through GVRP is
enabled on the device. The possible field values are:
■ Enabled — Enables GVRP registration on the device.
■ Disabled — Disables GVRP registration on the device.
To configure GVRP:
1 Click Policy > VLAN > GVRP > Modify. The GVRP Modify Page opens:
Figure 75 GVRP Modify Page
The GVRP Modify Page contains the following fields:
To Next Page
Loading...
