Configuring Radio 802.11a Settings 175
To view Radio 802.11a Settings:
1 Click Wireless > Radio 802.11a > Summary. The Radio 802.11a
Summary Page opens:
Figure 88 Radio 802.11a Summary Page
The Radio 802.11a Summary Page contains the following fields:
■ Access Point Name — Displays the specific access point to which the
radio settings are assigned.
■ DFS Status — Indicates the current Dynamic Frequency Selection
(DFS) status. DFS permits the system to scan and switch to different
channels. DFS listens for signals and monitors operating spectrums. IF
DFS detects a signal, the channel associated with the signal is vacated
or tagged as unavailable. The possible field values is:
■ Scanning – Indicates the system is currently scanning channels.
■ VAP — Displays the Virtual Access Point number.
■ SSID Broadcast — Indicates that SSID Broadcasting is enabled.
■ BS SID — Defines the Basic Service set by the SSID.
■ Profile — Displays the Profile Name.
Select the access point to be displayed from the drop-down list.
To Next Page
Loading...
