Viewing Dynamic Addresses 203
■ Aging Interval (10-630) — Specifies the amount of time the MAC
Address remains in the Dynamic MAC Address before it is timed out if
no traffic from the source is detected. The default value is 300
seconds.
■ Clear Table — Clears the Dynamic Address table when checked.
■ Interface — Specifies the interface for which the table is queried.
There are two interface types from which to select. Port or LAG
■ MAC Address — Specifies the MAC address for which the table is
queried.
■ VLAN ID — The VLAN ID for which the table is queried.
■ Address Table Sort Key — Specifies the means by which the
Dynamic Address Table is sorted. The address table can be sorted by
address, VLAN or interface.
2 Select the check box to remove the selected ARP entries.
3 Click . The ARP entries are deleted, and the device is updated.
To Next Page
Loading...
