2 CHAPTER : ABOUT THIS GUIDE
User Guide
Overview
This section provides an overview to the Embedded Web System User
Guide. The Embedded Web System User Guide provides the following
sections:
■ Configuring the Wizard — Provides information for configuring the
Setup wizard which enables system administrator configure basic
device settings at the Setup stage or to return and reconfigure the
device settings at any stage.
■ Getting Started — Provides information for using the Embedded
Web Management System, including adding, editing, and deleting
device configuration information.
■ Viewing Basic Settings — provides information for viewing and
configuring essential information required for setting up and
maintaining device settings.
■ Section 4, Configuring Device Security — Provides information for
configuring both system and network security, including traffic
control, ACLs, and device access methods.
■ Managing System Information — Provides information for
configuring general system information
including the user-defined
system name, the user-defined system location, and the system contact
person.
■ Configuring Wired Ports — Provides information for configuring
Port Settings.
■ Aggregating Ports — Provides information for configuring Link
Aggregation which optimizes port usage by linking a group of ports
together to form a single LAG.
■ Configuring VLANs — Provides information for configuring VLANs.
VLANs are logical subgroups with a Local Area Network (LAN) which
combine user stations and network devices into a single unit,
regardless of the physical LAN segment to which they are attached.
■ Defining WLAN — Provides information for configuring WLANs. A
Wireless Local Area Network (WLAN) is a technology that provides
network services using radio waves.
■ Configuring IP Information — Provides information for configuring
IP addresses, DHCP and ARP.
■ Configuring Mulitcast Forwarding — Provides information for
configuring Multicast forwarding.
To Next Page
Loading...
