Modifying Port Authentication 57
■ Authenticator State — Displays the current authenticator state.
1 Click Policy > Security > Port Authentication > Modify. The Port
Authentication Modify Page opens:
Figure 31 Port Authentication Modify Page
The Port Authentication Modify Page contains the following fields:
■ Port — Displays a list of interfaces on which port-based
authentication is enabled.
■ Admin Port Control — Displays the admin port authorization state.
■ ForceUnauthorized — Indicates that either the port control is force
Unauthorized and the port link is down, or the port control is Auto
but a client has not been authenticated via the port.
■ ForceAuthorized — Indicates that the port control is Forced
Authorized, and clients have full port access.
■ Auto — Indicates that the port control is Auto and a single client
has been authenticated via the port.
■ Current Port Control — Displays the current port authorization state.
■ Enable Guest VLAN — Specifies whether the Guest VLAN is enabled
on the device. The possible field values are:
To Next Page
Loading...
