ABB ACS880 - Page 467

Def / Type
FbEq 16b / 32b
DescriptionName / Range /
Selection
No.
1 = Follower 14 ready.Follower 14b13
1 = Follower 15 ready.Follower 15b14
1 = Follower 16 ready.Follower 16b15
1 = 10000h…FFFFh
- / uint16In the master, displays the ready status of the
communication with followers specified by parameter 60.24
M/F status supervision sel 2.
M/F follower ready
status 2
62.42
1 = Follower 17 ready.Follower 17b0
1 = Follower 18 ready.Follower 18b1
1 = Follower 19 ready.Follower 19b2
1 = Follower 20 ready.Follower 20b3
1 = Follower 21 ready.Follower 21b4
1 = Follower 22 ready.Follower 22b5
1 = Follower 23 ready.Follower 23b6
1 = Follower 24 ready.Follower 24b7
1 = Follower 25 ready.Follower 25b8
1 = Follower 26 ready.Follower 26b9
1 = Follower 27 ready.Follower 27b10
1 = Follower 28 ready.Follower 28b11
1 = Follower 29 ready.Follower 29b12
1 = Follower 30 ready.Follower 30b13
1 = Follower 31 ready.Follower 31b14
1 = Follower 32 ready.Follower 32b15
1 = 10000h…FFFFh
None / uint32
Parameters 62.45…62.50 define a target for the data
received in data sets 1 and 3 from the external controller.
These data sets are used in ModuleBus communication
with a “standard drive” (60.50 DDCS controller drive type
= ABB standard drive).
Parameters 62.95…62.100 display the data received from
the external controller in integer format, and can be used
as sources by other parameters.
For example, this parameter selects a target for word 1 of
data set 1. Parameter 62.95 Data set 1 data 1 value
displays the received data in integer format, and can also
be used as a source by other parameters.
Data set 1 data 1
selection
62.45
0None.None
1Control Word (16 bits)CW 16bit
2Reference REF1 (16 bits)Ref1 16bit
3Reference REF2 (16 bits)Ref2 16bit
See Terms and abbreviations (page 132).
Other
Parameters 467