When the oxygen cylinder is
connected, the oxygen pressure can
be monitored.
Set the power switch to “ON” to let
gas flow in and open the anaesthetic
system.
Set the power switch to “OFF” and
close the Anaesthetic Workstation to
prevent gas from flowing in.
Measure gauge gas supply pressure
of N
2
O, AIR, and O
2
flowing by airway.
Lighting for work
WARNING: When adjusting the
external lamp, don’t touch the lamp
surface for 1s.
Rocker Switch: Press the LOW or
HIGH side, and the switch is on.
The LOW side means low light, and
the HIGH side means high light.
To Next Page
Loading...