AGI BCX3 1549 - Install Tank (for Outside USA)

134 8210-00020 R1
3.37.3 Install Tank (for outside USA)
1. Secure the tank (6) to the tank bracket with gear clamps (4) (see Figure 68).
2. Attach the 1/4" hose barb (7) to the tank outlet.
3. Connect the 1/4" fuel line (9) to the hose barb with hose clamp (8).
Æ
4. For Under-mount Drive: Insert the square plug (10) into the hole in the bottom of the tank nearer to the
spout. To install primer bulb, see Section 3.37.4 – Install Primer Bulb (For Under-Mount Drive) on page 136.
Æ
5. For Top-mount Drive: To install fuel pump, see Section 3.37.5 – Install Fuel Pump (For Top-Mount Drive) on
page 138).
Table 29. Gas Tank Components
Item
Description Quantity
4
36" Gear Clamp
2
6
Gas Tank — 22 x 14 x 11.5 — 53 L (14 gal) — red
1
7
1/4" MPT x 1/4" Hose Barb
1
8
1/2" Hose Clamp
2
9
1/4" ID Fuel Line — 14'
1
10
Square Plug (threaded)
1
Hardware Kit: PARTK-15-96
3. ASSEMBLY FIELD LOADER S-DRIVE – PORTABLE GRAIN BELT CONVEYOR