94 8210-00020 R1
3.22. Align the Conveyor Belt
Basic Conveyor Belt Alignment:
The conveyor belt will run straight when all of the rollers are straight.
Loosen or tighten the adjustment bolt(s) to align the conveyor belt. Tighten the side the belt has moved toward,
or loosen the side the belt has moved away from.
Belt alignment is done while the belt is running.
Figure 38. Roller out of Alignment
Before Aligning the Belt:
• The conveyor must be empty of all grain.
• Wait until the belt makes a complete revolution before adjusting the rollers. Some belts may have uneven
edges, appearing misaligned.
To Align the Belt:
If your belt is tracking off-center, follow the sections and steps in the order following to center it.
Figure 39. Belt Tracking to One Side
3. ASSEMBLY FIELD LOADER S-DRIVE – PORTABLE GRAIN BELT CONVEYOR
To Next Page
Loading...
