Agilent 4155B/4156B User’s Guide Vol.2, Edition 5 6-51
Screen Organization
GRAPH/LIST Screen Group
LINE softkey
Select LINE primary softkey to display the secondary softkeys for performing
manual analysis that uses lines.
• CURSOR TO MARKER softkey
Select CURSOR TO MARKER secondary softkey to move the cursor to the
marker position.
• LINE SELECT softkey
Selecting this secondary toggles as follows:
1 line 1 is selected, and can be operated on.
2 line 2 is selected, and can be operated on.
NONE no lines are selected. The line secondary softkeys disappear.
You use the following softkeys to operate on each line. LINE SELECT setting is
not changed by auto-analysis function.
• LINE softkey
Select LINE secondary softkey to toggle the line mode between OFF and ON.
You can set line on/off for line 1 and line 2 independently.
OFF Line selected by LINE SELECT softkey disappears.
ON Line selected by LINE SELECT softkey is displayed.
If ON is displayed on this softkey, and OFF is displayed on GRAD MODE,
TANGENT MODE, and REGRESS MODE softkeys, the line mode is normal.
If you display lines by auto-analysis functions, you need to set LINE softkey to
ON in advance.
• GRAD MODE softkey
Select GRAD MODE secondary softkey to change the line mode to gradient
mode. If present mode is gradient mode, ON is displayed on the GRAD MODE
softkey.
For gradient line mode, GRAD VALUE secondary softkey is displayed. If line
mode is gradient mode, selecting GRAD MODE softkey changes to normal
mode.
To Next Page
Loading...
Need help?
General
