6-52 Agilent 4155B/4156B User’s Guide Vol.2, Edition 5
Screen Organization
GRAPH/LIST Screen Group
• TANGENT MODE softkey
Select TANGENT MODE secondary softkey to change the line mode to tangent
mode. If present mode is tangent mode, ON is displayed on the TANGENT
MODE softkey.
For tangent line mode, MARKER SKIP secondary softkey is displayed. When
line mode is tangent mode, selecting TANGENT MODE softkey changes to
normal mode.
• REGRESS MODE softkey
Select REGRESS MODE secondary softkey to change the line mode to
regression mode. If present mode is regression mode, ON is displayed on the
REGRESS MODE softkey.
For regression line mode, SELECT CURSOR secondary softkey is displayed.
When line mode is regression mode, selecting REGRESS MODE softkey
changes to normal mode.
• SELECT CURSOR softkey
Select SELECT CURSOR secondary softkey to exchange the active and
non-active cursors. Active cursor is highlighted. This softkey is displayed only
when line mode is normal or regression.
• GRAD VALUE softkey
Select GRAD VALUE secondary softkey to change the gradient value. The
present gradient value is shown on this softkey and in the data entry area. This
softkey is displayed only when line mode is gradient. You can change the value
as follows:
• Enter number by using numeric keys.
• Change number by rotating rotary knob.
• MARKER SKIP softkey
Select MARKER SKIP secondary softkey to move the marker to the next
measurement curve that was added by VAR2 variable or append measurement.
This softkey is displayed only when line mode is tangent.
To Next Page
Loading...
Need help?
General
