Agilent 4155B/4156B User’s Guide Vol.2, Edition 5 8-33
If You Have A Problem
If Errors Occur
326 Device not present. Unsupported file type.
Device or driver was not found to open the file. Unable to open file
because the file type is not supported.
327 Interrupted system call.
The lpr driver received a signal from the system, that interrupted the
data transfer from the lpr driver.
328 lpd time out occurred. Try again ?
A time out occurred when trying to connect to the lpd server because
the lpd server did not respond.
329 lpd print server cannot be recognized.
Unable to recognize the lpd print server. Verify the address setup or
setup syntax is correct.
330 lpd server connection failed or was denied.
The lpd server connection failed, or was denied, because the lpd server
was already connected or the server was blocked.
331 lpr data transfer failed.
Data transfer from the lpr server failed because lpr data communication
was disconnected. Verify the network is working properly and check to
see if the server is up.
332 Unable to print out. Not enough device space.
Unable to print out because the device connection failed. There is not
enough available space in the buffer for the communication.
334 lpr failed data transfer. Data size mismatch.
Unable to print out because the lpr server failed data transfer. The size
of the data was not the expected size.
335 lpr Network interface is down. Try again ?
The network interface cannot be found because the network interface
for the lpr server is down.
336 Unable to print out. Reason unknown.
Network connection failed. The reason for the failure is unknown.
To Next Page
Loading...
Need help?
General
