12 Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide
Measurement Trend 97
Chart Logic Bus Timing 98
Chart Logic Bus State 99
5 Reference Waveforms
To save a waveform to a reference waveform location 101
To display a reference waveform 102
To scale and position reference waveforms 103
To adjust reference waveform skew 103
To display reference waveform information 104
To save/recall reference waveform files to/from a USB storage
device 104
6 Digital Channels
To connect the digital probes to the device under test 105
Probe cable for digital channels 106
Acquiring waveforms using the digital channels 109
To display digital channels using AutoScale 109
Interpreting the digital waveform display 110
To change the displayed size of the digital channels 111
To switch a single channel on or off 112
To switch all digital channels on or off 112
To switch groups of channels on or off 112
To change the logic threshold for digital channels 112
To reposition a digital channel 113
To display digital channels as a bus 114
To Next Page
Loading...
