318 Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide
21 Web Interface
The SCPI Command window is useful for testing commands or entering a
few commands interactively. When creating automated programs for
controlling the oscilloscope, you will typically use the Agilent IO Libraries
from within a programming environment like Microsoft Visual Studio (see
"Remote Programming with Agilent IO Libraries" on page 322).
Real Scope Remote Front Panel
To operate the oscilloscope using the web interface's Real Scope Remote
Front Panel:
1 Access the oscilloscope's web interface (see "Accessing the Web
Interface" on page 316).
2 When the oscilloscope's web interface is displayed, select
Browser Web Control, then select Real Scope Remote Front Panel. After a few
seconds the Remote Front Panel appears.
3 Click keys or knobs that you would normally press on the oscilloscope's
front panel. Drag on edges of knobs to turn them.
If Java is not installed on your PC, you will be prompted to install the Sun Microsystems
Java Plug-in. This plug-in must be installed on the controlling PC for the web interface's
Remote Front Panel or Remote Programming operations.
To Next Page
Loading...
Need help?
General
