Agilent Technologies InfiniiVision 3000 X-Series - Save;Recall (Setups, Screens, Data); Saving Setups, Screen Images, or Data

275
Agilent InfiniiVision 3000 X-Series Oscilloscopes
User's Guide
s1
18
Save/Recall (Setups, Screens, Data)
Saving Setups, Screen Images, or Data 275
Recalling Setups, Masks, or Data 283
Recalling Default Setups 286
Performing a Secure Erase 286
Oscilloscope setups, reference waveforms, and mask files can be saved to
internal oscilloscope memory or to a USB storage device and recalled
later. You can also recall default or factory default setups.
Oscilloscope screen images can be saved to a USB storage device in BMP
or PNG formats.
Acquired waveform data can be saved to a USB storage device in
comma- separated value (CSV), ASCII XY, and binary (BIN) formats.
There is also a command to securely erase all the oscilloscope's
non- volatile internal memory.
Saving Setups, Screen Images, or Data
1 Press the [Save/Recall] key.
2 In the Save/Recall Menu, press Save.
3 In the Save Trace and Setup Menu, press Format; then, turn the Entry
knob to select the type of file you want to save:
• Setup (*.scp) — The oscilloscope's horizontal timebase, vertical
sensitivity, trigger mode, trigger level, measurements, cursors, and
math function settings that tell the oscilloscope how to make a
particular measurement. See "To save setup files" on page 277.