Agilent Technologies InfiniiVision 3000 X-Series - Integrate

80 Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide
4 Math Waveforms
See Also • "To perform transforms or filters on an arithmetic operation" on
page 75
• "Units for Math Waveforms" on page 76
Integrate
 dt (integrate) calculates the integral of the selected source. You can use
integrate to calculate the energy of a pulse in volt- seconds or measure the
area under a waveform.
 dt plots the integral of the source using the "Trapezoidal Rule". The
equation is:
Where:
• I = integrated waveform.
Figure 7 Example of Differentiate Function
I
n
= c
o
+Δt
∑
i=0
n
y
i