Agilent Technologies InfiniiVision 3000 X-Series - To Save Setup Files; To Save BMP or PNG Image Files

Save/Recall (Setups, Screens, Data) 18
Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide 277
• Arbitrary Waveform data (*.csv) — This creates a file of comma- separated
values for the arbitrary waveform points' time and voltage values. See
"To save arbitrary waveforms" on page 282.
• Power Harmonics data (*.csv) — When the DSOX3PWR power analysis
allication is licensed, this creates a file of comma- separated values
for the current harmonics power analysis results. See the DSOX3PWR
Power Measurement Application User's Guide for more information.
You can also configure the [Quick Action] key to save setups, screen images,
or data. See "Configuring the [Quick Action] Key" on page 311.
To save setup files
Setup files can be saved to one of 10 internal (\Agilent Flash) locations or
to an external USB storage device.
1 Press [Save/Recall] > Save > Format; then, turn the Entry knob to select
Setup (*.scp).
2 Press the softkey in the second position and use the Entry knob to
navigate to the save location. See "To navigate storage locations" on
page 282.
3 Finally, press the Press to Save softkey.
A message indicating whether the save was successful is displayed.
Setup files have the extension SCP. These extensions appear when using
the File Explorer (see "File Explorer" on page 299), but they do not
appear when using the Recall Menu.
To save BMP or PNG image files
Image files can be saved to an external USB storage device.
1 Press [Save/Recall] > Save > Format; then, turn the Entry knob to select
8-bit Bitmap image (*.bmp), 24-bit Bitmap image (*.bmp), or 24-bit image (*.png).
2 Press the softkey in the second position and use the Entry knob to
navigate to the save location. See "To navigate storage locations" on
page 282.
3 Press the Settings softkey.
In the File Settings Menu, you have these softkeys and options: