Agilent Technologies InfiniiVision 3000 X-Series User Manual

143
Agilent InfiniiVision 3000 X-Series Oscilloscopes
User's Guide
s1
10
Triggers
Adjusting the Trigger Level 145
Forcing a Trigger 145
Edge Trigger 146
Edge then Edge Trigger 148
Pulse Width Trigger 149
Pattern Trigger 152
OR Trigger 155
Rise/Fall Time Trigger 157
Nth Edge Burst Trigger 158
Runt Trigger 160
Setup and Hold Trigger 162
Video Trigger 163
USB Trigger 175
Serial Trigger 177
A trigger setup tells the oscilloscope when to acquire and display data.
For example, you can set up to trigger on the rising edge of the analog
channel 1 input signal.
You can adjust the vertical level used for analog channel edge detection by
turning the Trigger Level knob.
In addition to the edge trigger type, you can also set up triggers on
rise/fall times, Nth edge bursts, patterns, pulse widths, runt pulses, setup
and hold violations, TV signals, USB signals, and serial signals (if option
licenses are installed).
You can use any input channel or the "External Trigger Input" on
page 184 BNC as the source for most trigger types.

Agilent Technologies InfiniiVision 3000 X-Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 3000 X-Series
Category	Test Equipment
Language	English