Agilent Technologies InfiniiVision 3000 X-Series - Navigating Segments; Measurements, Statistics, and Infinite Persistence with Segmented Memory; Chapter

Acquisition Control 12
Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide 201
See Also • "Navigating Segments" on page 201
• "Measurements, Statistics, and Infinite Persistence with Segmented
Memory" on page 201
• "Segmented Memory Re-Arm Time" on page 202
• "Saving Data from Segmented Memory" on page 202
Navigating Segments
1 Press the Current Seg softkey and turn the Entry knob to display the
desired segment along with a time tag indicating the time from the first
trigger event.
You can also navigate segments using the [Navigate] key and controls. See
"To navigate segments" on page 62.
Measurements, Statistics, and Infinite Persistence with Segmented Memory
To perform measurements and view statistical information, press [Meas]
and set up your desired measurements (see Chapter 14, “Measurements,”
starting on page 215). Then, press Analyze Segments. Statistical data will be
accumulated for the measurements you have chosen.
Progress indicator
Sample rate