Agilent Technologies InfiniiVision 3000 X-Series User Manual

289
Agilent InfiniiVision 3000 X-Series Oscilloscopes
User's Guide
s1
19
Print (Screens)
To print the oscilloscope's display 289
To set up network printer connections 290
To specify the print options 292
To specify the palette option 293
You can print the complete display, including the status line and softkeys,
to a USB printer or a network printer when the DSOXLAN LAN/VGA
module is installed.
The Print Configuration Menu is displayed when you press the [Print] key.
The print option softkeys and the Press to Print softkey are ghosted (not
available) until a printer is connected.
To print the oscilloscope's display
1 Connect a printer. You can:
• Connect a USB printer to either the USB port on the front panel or
the rectangular USB host port on the rear panel.
For the most up- to- date listing of printers that are compatible with
the InfiniiVision oscilloscopes, please visit
"www.agilent.com/find/InfiniiVision- printers".
• Set up a network printer connection. See "To set up network printer
connections" on page 290.
2 Press the [Print] key on the front panel.
3 In the Print Configuration Menu, press the Print to softkey; then, turn
the Entry knob to select the desired printer.

Agilent Technologies InfiniiVision 3000 X-Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 3000 X-Series
Category	Test Equipment
Language	English