Agilent Technologies InfiniiVision 3000 X-Series User Manual

128 Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide
7 Serial Decode
7 Press the Undo Zoom softkey to return to the horizontal scale and delay
settings before the last Zoom to Selection.
8 Press the Options softkey to open the Lister Options Menu. In this menu,
you can:
• Enable or disable the Track Time option. When enabled, as you select
different Lister rows (using the Entry knob while acquisitions are
stopped), the horizontal delay changes to the Time of the selected
row. Also, changing the horizontal delay will scroll the Lister.
• Press the Scroll Lister softkey and use the Entry knob to scroll though
data rows in the Lister display.
• Press the Time Ref softkey and use the Entry knob to select whether
the Time column in the Lister display shows times relative to the
trigger or relative to the previous packet row.
Searching Lister Data
When serial decode is enabled, you can use the [Search] key to find and
place marks on rows in the Lister.
The Search softkey lets you specify events to find. It is similar to
specifying protocol triggers.
Events found are marked in orange in the far left Lister column. The total
number of events found is displayed above the softkeys.

Agilent Technologies InfiniiVision 3000 X-Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 3000 X-Series
Category	Test Equipment
Language	English