Agilent Technologies InfiniiVision 3000 X-Series User Manual

316 Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide
21 Web Interface
The web interface for InfiniiVision X- Series oscilloscopes also provides
help for each of its pages.
Microsoft Internet Explorer is the recommended Web browser for
communication and control of the oscilloscope. Other Web browsers may
work but are not guaranteed to work with the oscilloscope. The Web
browser must be Java- enabled with Sun Microsystems Java Plug- in.
Before you can use the web interface, you must place the oscilloscope on
the network and set up its LAN connection.
Accessing the Web Interface
To access the oscilloscope's web interface:
1 Connect the oscilloscope to your LAN (see "To establish a LAN
connection" on page 297) or establish a point- to-point connection (see
"Stand- alone (Point- to- Point) Connection to a PC" on page 298).
It is possible to use a point- to- point connection, but using a normal
LAN connection is the preferred method.
2 Type the oscilloscope's hostname or IP address in the web browser.
The oscilloscope's web interface Welcome Page is displayed.

Agilent Technologies InfiniiVision 3000 X-Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 3000 X-Series
Category	Test Equipment
Language	English