Agilent Technologies InfiniiVision 3000 X-Series - Add Annotation

312 Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide
20 Utility Settings
Adding an Annotation
You can add an annotation to the upper left corner of the oscilloscope's
display. The annotation is useful for documentation purposes, to add notes
before capturing screens.
To add an annotation:
1 On the oscilloscope's front panel, press [Utility].
2 In the Utility Menu, press Annotation.
3 In the Annotation Menu, press Annotation to enable the annotation.
4 Press Edit.
5 In the Edit Annotation Menu:
• Use the Spell, , , and Delete Character softkeys to enter the
annotation text:
• Spell — press this softkey and turn the Entry knob to select the
character at the current position.
• — press this softkey to enter characters and move the cursor
to the next character position.