Agilent Technologies InfiniiVision 3000 X-Series User Manual

138 Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide
9 Labels
2 To turn the labels off, press the [Label] key again.
To assign a predefined label to a channel
1 Press the [Label] key.
2 Press the Channel softkey, then turn the Entry knob or successively
press the Channel softkey to select a channel for label assignment.

Agilent Technologies InfiniiVision 3000 X-Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 3000 X-Series
Category	Test Equipment
Language	English