Agilent Technologies InfiniiVision 3000 X-Series - Interpreting Flexray Decode

372 Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide
24 FlexRay Triggering and Serial Decode
3 If the oscilloscope is stopped, press the [Run/Stop] key to acquire and
decode data.
You can use the horizontal Zoom window for easier navigation of the
acquired data.
See Also • "Interpreting FlexRay Decode" on page 372
• "FlexRay Totalizer" on page 373
• "Interpreting FlexRay Lister Data" on page 374
• "Searching for FlexRay Data in the Lister" on page 374
Interpreting FlexRay Decode
• Frame type (NORM, SYNC, SUP, NULL in blue).
• Frame ID (decimal digits in yellow).
• Payload- length (decimal number of words in green).
• Header CRC (hex digits in blue plus red HCRC error message if
invalid).
• Cycle number (decimal digits in yellow).
• Data bytes (HEX digits in white).