Agilent Technologies InfiniiVision 3000 X-Series - Page 14

14 Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide
Forcing a Trigger 145
Edge Trigger 146
Edge then Edge Trigger 148
Pulse Width Trigger 149
Pattern Trigger 152
Hex Bus Pattern Trigger 155
OR Trigger 155
Rise/Fall Time Trigger 157
Nth Edge Burst Trigger 158
Runt Trigger 160
Setup and Hold Trigger 162
Video Trigger 163
To set up Generic video triggers 168
To trigger on a specific line of video 168
To trigger on all sync pulses 170
To trigger on a specific field of the video signal 170
To trigger on all fields of the video signal 171
To trigger on odd or even fields 172
USB Trigger 175
Serial Trigger 177
11 Trigger Mode/Coupling
To select the Auto or Normal trigger mode 180
To select the trigger coupling 182
To enable or disable trigger noise rejection 183
To enable or disable trigger HF Reject 183
To set the trigger holdoff 184