Agilent Technologies InfiniiVision 3000 X-Series - Page 18

18 Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide
To use waveform generator logic presets 268
To add noise to the waveform generator output 269
To add modulation to the waveform generator output 269
To set up Amplitude Modulation (AM) 270
To set up Frequency Modulation (FM) 271
To set up Frequency-Shift Keying Modulation (FSK) 273
To restore waveform generator defaults 274
18 Save/Recall (Setups, Screens, Data)
Saving Setups, Screen Images, or Data 275
To save setup files 277
To save BMP or PNG image files 277
To save CSV, ASCII XY, or BIN data files 278
Length Control 279
To save Lister data files 280
To save reference waveform files to a USB storage device 281
To save masks 281
To save arbitrary waveforms 282
To navigate storage locations 282
To enter file names 283
Recalling Setups, Masks, or Data 283
To recall setup files 284
To recall mask files 284
To recall reference waveform files from a USB storage
device 285
To recall arbitrary waveforms 285
Recalling Default Setups 286
Performing a Secure Erase 286
19 Print (Screens)
To print the oscilloscope's display 289