Agilent Technologies InfiniiVision 3000 X-Series User Manual

86 Agilent InfiniiVision 3000 X-Series Oscilloscopes User's Guide
4 Math Waveforms
See Also • "To perform transforms or filters on an arithmetic operation" on
page 75
• "FFT Measurement Hints" on page 86
• "FFT Units" on page 88
• "FFT DC Value" on page 88
• "FFT Aliasing" on page 88
• "FFT Spectral Leakage" on page 89
• "Units for Math Waveforms" on page 76
FFT Measurement Hints
The number of points acquired for the FFT record can be up to 65,536,
and when frequency span is at maximum, all points are displayed. Once
the FFT spectrum is displayed, the frequency span and center frequency
controls are used much like the controls of a spectrum analyzer to
examine the frequency of interest in greater detail. Place the desired part
of the waveform at the center of the screen and decrease frequency span
to increase the display resolution. As frequency span is decreased, the
number of points shown is reduced, and the display is magnified.

Agilent Technologies InfiniiVision 3000 X-Series Specifications

General

Brand	Agilent Technologies
Model	InfiniiVision 3000 X-Series
Category	Test Equipment
Language	English