VPRN Service Configuration Commands
Page 1126 7750 SR OS Services Guide
Sample Output
A:ALA-48# show service id 1 all
===============================================================================
Service Detailed Information
===============================================================================
Service Id : 1 Vpn Id : 0
Service Type : VPRN
Customer Id : 1
Last Status Change: 11/28/2006 12:31:53
Egress Queue 1
The index of the egress QoS queue of the SAP.
In profile for-
warded
The number of in-profile packets or octets (rate below CIR) for-
warded.
In profile dropped
The number of in-profile packets or octets dropped for the SAP.
Out profile for-
warded
The number of out-of-profile packets or octets (rate above CIR) for-
warded.
Out profile
dropped
The number of out-of-profile packets or octets discarded.
DHCP Relay
State
Specifies whether DHCP Relay is enabled on this SAP
Info Option
Specifies whether Option 82 processing is enabled on this SAP
Action
Specifies the Option 82 processing on this SAP or interface: keep,
replace or drop
Circuit ID
Specifies whether the If Index is inserted in Circuit ID suboption of
Option 82
Remote ID
Specifies whether the far-end MAC address is inserted in Remote ID
suboption of Option 82
Service Access Points
Managed by Service
Specifies the service-id of the management VPLS managing this SAP.
Managed by SAP
Specifies the sap-id inside the management VPLS managing this SAP.
Prune state
Specifies the STP state inherited from the management VPLS.
Spoke SDPs
Managed by Service
Specifies the service-id of the management VPLS managing this
spoke SDP.
Managed by Spoke
Specifies the sap-id inside the management VPLS managing this
spoke SDP.
Prune state
Specifies the STP state inherited from the management VPLS.
Label Description (Continued)
To Next Page
Loading...
