VLL Services Command Reference
Page 224 7750 SR OS Services Guide
Epipe Service Configuration Commands
config
—service
— [no] epipe service-id [customer customer-id] [vpn vpn-id] [vc-switching]
— description description-string
—no description
— [no] endpoint endpoint-name
— active-hold-delay active-endpoint-delay
—no active-hold-delay
— description description-string
—no description
— revert-time [revert-time | infinite]
—no revert-time
— sap sap-id [no-endpoint]
— sap sap-id [endpoint endpoint-name]
—no sap sap-id
— accounting-policy acct-policy-id
—no accounting-policy
— atm
— egress
— traffic-desc traffic-desc-profile-id
—no traffic-desc
— encapsulation atm-encap-type
— ingress
— traffic-desc traffic-desc-profile-id
—no traffic-desc
— oam
— [no] alarm-cells
— [no] collect-stats
— description description-string
—no description
— egress
— agg-rate-limit agg-rate
—no agg-rate-limit
— filter [ip ip-filter-id]
— filter [ipv6 ipv6-filter-id]
— filter [mac mac-filter-id]
—no filter [ip ip-filter-id] [ipv6 ipv6-filter-id] [mac mac-filter-id]
— [no] qinq-mark-top-only
— qos policy-id
—no qos
— [no] queue-override
— [no] queue queue-id
— adaptation-rule [pir adaptation-rule] [cir
adaptation-rule]
— no adaptation-rule
— avg-frame-overhead percentage
—no avg-frame-overhead
— cbs size-in-kbytes
— no cbs
— high-prio-only percent
— no high-prio-only
— mbs {size-in-kbytes | default}
— no mbs
— rate
pir-rate [cir cir-rate]
To Next Page
