Configuring an IES Service with CLI
Page 684 7750 SR OS Services Guide
arp-timeout
Configures the minimum time in seconds an ARP entry learned on the IP
interface will be stored in the ARP table.
733
authentication-
policy
Assigns a RADIUS authentication policy to the interface 722
bfd
Specifies the BFD parameters for the associated IP interface 733
cflowd
Configures cflowd collection and analysis on the (routeable) interface. 734
host
Creates a static host for the SAP. Applications within the system that make
use of static host entries include anti-spoof and source MAC population
into the VPLS forwarding database.
740
host-connectivity-
verify
Enables or disable host connectivity verification for all hosts on this inter-
face.
769
ip-mtu
Configures the interface IP maximum transmit unit. 735
loopback
Specifies that the associated interface is a loopback interface that has no
associated physical interface.
735
mac
Assigns a specific MAC address to an IES or IES IP interface. 735
proxy-arp
Enables a proxy ARP policy for the interface. 738
secondary
Assigns an secondary IP address/IP subnet/broadcast address format to the
interface.
736
static-arp
Configures a static address resolution protocol (ARP) entry associating a
subscriber IP address with a MAC address for the core router instance.
737
tos-marking-state
Configures the ToS field to a trusted state or a non-trusted state. 737
no shutdown
Administratively enables the service. 717
Configure IES DHCP parameters
config>service>ies>if>dhcp
config>service>ies>sub-if>grp-if>dhcp
dhcp
Configures DHCP parameters for this interface. 742
description
Specifies a text string description for DHCP on this interface. 718
gi-address
Configures the gateway interface address for the DHCP relay. 747
lease-populate
Enables dynamic host lease state management for IP interfaces. 748
option
Configures DHCP Option 82 processing for this interface. 743
server
Configures the DHCP server IP address. 747
no shutdown
Enables DHCP on this interface. 717
trusted
Enables relaying of untrusted packets. 747
config>service>ies>if>dhcp>option
action
Configures the DHCP relay reforwarding policy action. 742
Table 1: CLI Commands to Configure IES Service Parameters (Continued)
Command Description Page
To Next Page
Loading...
