IES Service Configuration Commands
Page 798 7750 SR OS Services Guide
backup
Syntax [no] backup ip-address
Context config>service>ies>if>vrrp
Description This command configures virtual router IP addresses for the interface.
init-delay
Syntax init-delay seconds
no init-delay
Context config>service>ies>if>vrrp
Description This command configures a VRRP initialization delay timer.
Default no init-delay
Parameters seconds — Specifies the initialization delay timer for VRRP, in seconds.
Values 1 — 65535
mac
Syntax mac ieee-address
no mac
Context config>service>ies>if>vrrp
Description This command assigns a specific MAC address to an IES IP interface.
The no form of the command returns the MAC address of the IP interface to the default value.
Default The physical MAC address associated with the Ethernet interface that the SAP is configured on (the
default MAC address assigned to the interface, assigned by the system).
Parameters ieee-address — Specifies the 48-bit MAC address for the static ARP in the form aa:bb:cc:dd:ee:ff or
aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee, and ff are hexadecimal numbers. Allowed values are
any non-broadcast, non-multicast MAC and non-IEEE reserved MAC addresses.
master-int-inherit
Syntax [no] master-int-inherit
Context config>service>ies>if>vrrp
Description This command allows the master instance to dictate the master down timer (non-owner context only).
Default no master-int-inherit